Giá: Liên hệ
MUA MỘT LẦN – DÙNG CẢ ĐỜI
Miễn phí công lắp đặt
Bảo hành 2 năm, bảo trì trọn đời
Thay, nâng cấp vỏ máy thành inox 304 cao cấp, siêu bền
Thay khay đá, nâng cấp công suất máy lên mức cao hơn theo nhu cầu sử dụng của khách hàng
Thay máy nén (block) chi phí hợp lý.
Trọn bộ sản phẩm kèm sách hướng dẫn sử dụng
Sản phẩm tương tự
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ
Máy nén lạnh danfoss 120B0029
| TYPE CODE | VTZ |
| NET WEIGHT | 26.00 Kg |
| APPROVAL STANDARDS | CE certified; UL certified when connected to frequency converter |
| BRAND TECHNIQUE | Reciprocating compressor |
| CAPACITY CONTROL | Inverter |
| COLOUR | Blue |
| CONFIGURATION CODE | Single |
| CONNECTION TYPE | Rotolock |
| CYLINDER | 1 |
| DISCHARGE CONNECTION MOUNTING TORQUE [NM] | 80 |
| DISCHARGE CONNECTION PIPE SIZE [IN] | 1/2 |
| DISCHARGE CONNECTION ROTOLOCK SIZE [IN] | 1 |
| DISCHARGE CONNECTION SIZE [IN] | 1 |
| DISCHARGE CONNECTION SLEEVE PIPE SIZE [IN] | 1/2 |
| DRAWING NUMBER | 8501042a |
| ECONOMIZER | No |
| FACTORY HP [BAR] | 25 |
| FACTORY LP [BAR] | 25 |
| FITTING REMARK | (shipped with rotolock version only) |
| FITTING SLEEVE | ODF |
| FITTING STANDARD | Rotolock |
| FREQUENCY [HZ] | 35 – 90 |
| GP LP TORQUE [NM] | 15 |
| GAUGE PORT HP | None |
| GAUGE PORT LP | Schrader |
| GENERATION CODE | A |
| GLASS MOUNTING | Threaded |
| GLASS TORQUE [NM] | 50 |
| GROSS WEIGHT | 27.75 Kg |
| HIGH VALUE OF NOMINAL VOLTAGE AT 50HZ [V] | 240 |
| HIGH VALUE OF NOMINAL VOLTAGE AT 60HZ [V] | 240 |
| HIGH VALUE OF VOLTAGE RANGE AT 50HZ [V] | 240 |
| HIGH VALUE OF VOLTAGE RANGE AT 60HZ [V] | 240 |
| IP PROTECTION CLASS | IP54 (with cable gland) |
| LRA | 69 A |
| LOW VALUE OF NOMINAL VOLTAGE AT 50HZ [V] | 200 |
| LOW VALUE OF NOMINAL VOLTAGE AT 60HZ [V] | 200 |
| LOW VALUE OF VOLTAGE RANGE AT 50HZ [V] | 200 |
| LOW VALUE OF VOLTAGE RANGE AT 60HZ [V] | 200 |
| MMT | 17 A |
| MODEL NUMBER | VTZ038AJNR1A |
| MOTOR PROTECTION | Motor protection by frequency converter |
| MOUNTING TORQUE [NM] | 15 |
| NOMINAL COOLING CAPACITY AT 50HZ | 1.7 |
| NOMINAL COOLING CAPACITY AT 60HZ | 4.4 |
| NUMBER OF STARTS PER HOUR [MAX] | 12 |
| OIL CHARGE [CM3] | 0.95 |
| OIL EQUALIZATION | 3/8” flare SAE |
| OIL EQUALIZATION TORQUE [NM] | 48 |
| OIL REFERENCE | 160PZ |
| PACKAGING HEIGHT [MM] | 385 |
| PACKAGING LENGTH [MM] | 330 |
| PACKAGING WIDTH [MM] | 295 |
| PACKING FORMAT | Single pack |
| PACKING QUANTITY | 1 |
| PHASE | 3 |
| POWER CONNECTIONS | Screw 4.8 mm |
| RLA | 13.5 A |
| REFRIGERANT | R134a; R404A; R407C; R507A |
| REFRIGERANT CHARGE [KG] [MAX] | 2.5 |
| RELIEF VALVE | 30 bar/8 bar |
| ROTATIONAL SPEED AT 50HZ [RPM] | 0 |
| ROTATIONAL SPEED AT 60HZ [RPM] | 0 |
| SEGMENT USAGE | Air conditioning; Refrigeration LT; Refrigeration MT |
| SHIPPED FITTINGS | Suction and discharge solder sleeves, rotolock nuts and gaskets |
| SHIPPED INSTRUCTIONS | Installation instructions |
| SHIPPED MOUNTING | Mounting kit with grommets, bolts, nuts, sleeves and washers |
| SHIPPED OIL | Initial oil charge |
| SPEED PLATFORM | Variable-speed |
| SUCTION CONNECTION MOUNTING TORQUE [NM] | 90 |
| SUCTION CONNECTION PIPE SIZE [IN] | 5/8 |
| SUCTION CONNECTION ROTOLOCK SIZE [IN] | 1 1/4 |
| SUCTION CONNECTION SIZE [IN] | 1 1/4 |
| SUCTION CONNECTION SLEEVE PIPE SIZE [IN] | 5/8 |
| SWEPT VOLUME [CM3] | 38.12 |
| TECHNIQUE | Reciprocating |
| TEST HP [BAR] [MAX] | 30 |
| TEST LP [BAR] [MAX] | 25 |
| TEST DIF [BAR] [MAX] | 30 |
| TORQUE EARTH [NM] | 2 |
| TORQUE POWER [NM] | 3 |
| TYPE DESIGNATION | Compressor |
| VISCOSITY [CP] | 32 |
| WINDING RESISTANCE FOR THREE-PHASE COMPRESSORS WITH IDENTICAL WINDINGS [OHM] | 0.65 Ohm |
| • ACOUSTIC HOOD 1 | 120Z0471 |
| • ACOUSTIC HOOD 1 DESCRIPTION | Acoustic hood for one-cylinder compressor |
| • ACOUSTIC HOOD 2 | 120Z0575 |
| • ACOUSTIC HOOD 2 DESCRIPTION | Acoustic hood for one-cylinder compressor |
| • ANGLE SET | 7703012 |
| • ANGLE SET DESCRIPTION | Angle adapter set, C09 (1-1/4″~5/8″), C06 (1″~1/2″) |
| • BELT 01 | 7773106 |
| • BELT 01 DESCRIPTION | Belt type crankcase heater, 54 W, 230 V, CE mark, UL |
| • CONVERTER 1 | 192L0929 |
| • CONVERTER 2 | 192L0930 |
| • DISCHARGE ANGLE | 8168007 |
| • DISCHARGE ANGLE DESCRIPTION | Angle adaptor, C06 (1″ rotolock, 1/2″ ODF) |
| • DISCHARGE GASKET | 8156130 |
| • DISCHARGE GASKET DESCRIPTION | Gasket, 1″ |
| • DISCHARGE SLEEVE | 8153007 |
| • DISCHARGE SLEEVE DESCRIPTION | Solder sleeve, P06 (1″ rotolock, 1/2″ ODF) |
| • DISCHARGE VALVE | 8168031 |
| • DISCHARGE VALVE DESCRIPTION | Rotolock valve, V06 (1″ rotolock, 1/2″ ODF) |
| • DRIVE 01 | 131B5347 |
| • DRIVE 01 DESCRIPTION | CD302 4.0kW; without coating; IP20; with LCP; H1; A3 |
| • DRIVE 02 | 131B5348 |
| • DRIVE 02 DESCRIPTION | CD302 4.0kW; without coating; IP20; without LCP; H1; A3 |
| • DRIVE 03 | 131B5349 |
| • DRIVE 03 DESCRIPTION | CD302 4.0kW; without coating; IP20; with LCP; H2; A3 |
| • DRIVE 04 | 131B5350 |
| • DRIVE 04 DESCRIPTION | CD302 4.0kW; without coating; IP20; without LCP; H2; A3 |
| • EBOX | 120Z0146 |
| • EBOX DESCRIPTION | Terminal box, including cover |
| • EBOX COVER | 120Z0149 |
| • EBOX COVER DESCRIPTION | Terminal box cover |
| • ELECTRONIC BOARD 1 | 130B1109 |
| • ELECTRONIC BOARD 1 DESCRIPTION | Control card |
| • ELECTRONIC BOARD 2 | 130B1110 |
| • ELECTRONIC BOARD 2 DESCRIPTION | Relays card |
| • FSA CONNECTOR | 023U8014 |
| • GASKET SET | 8156009 |
| • GASKET SET DESCRIPTION | Gasket set, 1″, 1-1/4″, 1-3/4″, OSG gaskets black and white |
| • LCP 4 | 130B1077 |
| • LCP 4 DESCRIPTION | LCP blind cover/frequency converter IP55/IP66 |
| • MOUNTING KIT 1 | 8156001 |
| • MOUNTING KIT 1 DESCRIPTION | Mounting kit for one and two-cylinder compressor, including 3 grommets, 3 bolts |
| • OIL 1 | 7754019 |
| • OIL 1 DESCRIPTION | POE lubricant, 160PZ, 1-litre can |
| • OIL EQUALIZATION CONNECTION | 8153127 |
| • OIL EQUALIZATION CONNECTION DESCRIPTION | Oil equalisation nut |
| • OIL SIGHT GLASS | 8156019 |
| • OIL SIGHT GLASS DESCRIPTION | Oil sight glass with gaskets (black and white) |
| • OIL SIGHT GLASS GASKET | 8156145 |
| • OIL SIGHT GLASS GASKET DESCRIPTION | Gasket for oil sight glass (black chloroprene) |
| • PTC | 120Z0459 |
| • PTC DESCRIPTION | PTC heater 27W, CE mark, UL |
| • SUCTION ANGLE | 8168009 |
| • SUCTION ANGLE DESCRIPTION | Angle adaptor, C09 (1-1/4″ rotolock, 5/8″ ODF) |
| • SUCTION GASKET | 8156131 |
| • SUCTION GASKET DESCRIPTION | Gasket, 1-1/4″ |
| • SUCTION SLEEVE | 8153011 |
| • SUCTION SLEEVE DESCRIPTION | Solder sleeve, P09 (1-1/4″ rotolock, 5/8″ ODF) |
| • SUCTION VALVE | 8168033 |
| • SUCTION VALVE DESCRIPTION | Rotolock valve, V09 (1-1/4″ rotolock, 5/8″ ODF) |
| • T BLOCK | 8173230 |
| • T BLOCK DESCRIPTION | T block connector 52 x 57 mm |
| • VALVE SET | 7703005 |
| • VALVE SET DESCRIPTION | Valve set, V09 (1-1/4″~5/8″), V06 (1″~1/2″) |
MÁY NÉN DANFOSS 120B0029
Error: Contact form not found.
Với phương châm hoạt động luôn hướng đến khách hàng, hậu mãi sau bán hàng là sự kết hợp giữa dịch vụ sau bán hàng hoàn hảo với sự phục vụ chu đáo, tận tâm và luôn luôn lắng nghe ý kiến phản hồi từ khách hàng. Tất cả những điều này giúp chúng tôi định hướng và dần tiến đến tầm nhìn NPT trở thành biểu tượng niềm tin số một Việt Nam về sản phẩm phục vụ công nghiệp.
VĂN PHÒNG MIỀN BẮC
VP Miền Bắc: LK2, CT6, Kiến Hưng, Hà Đông - Hà Nội
Hotline: 0934 477 786
Email: info@namphuthai.vn
VĂN PHÒNG MIỀN NAM
VP Miền Nam: Số 652/38 Cộng Hòa, Phường 13 , Quận Tân Bình, TP Hồ Chí Minh.
Hotline: 0917 570 020
Email: hcm@namphuthai.vn
VĂN PHÒNG MIỀN TRUNG
VP Miền Trung: 29 Hoàng Văn Thái, Liên Chiểu, TP Đà Nẵng.
Hotline: 0932 266 458
Email: danang@namphuthai.vn
Block "block-tab-tai-sao-chon" not found
VĂN PHÒNG MIỀN BẮC
VP Miền Bắc: 88 Kim Giang - Thanh Xuân - Hà Nội
Hotline: 0934 477 786
Email: info@namphuthai.vn
VĂN PHÒNG MIỀN NAM
VP Miền Nam: Số 652/38 Cộng Hòa, Phường 13 , Quận Tân Bình, TP Hồ Chí Minh.
Hotline: 0917 570 020
Email: hcm@namphuthai.vn
VĂN PHÒNG MIỀN TRUNG
VP Miền Trung: 29 Hoàng Văn Thái, Liên Chiểu, TP Đà Nẵng.
Hotline: 0932 266 458
Email: danang@namphuthai.vn
